Skip to content
Serving Brooklyn and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (912) 885-2735

Air Duct Cleaning in Brooklyn and Nearby Cities

Serving Brooklyn and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Request Service Call (912) 885-2735

Tell us what’s going on

Prefer to talk? (912) 885-2735

The short answer

Air duct cleaning is worth doing when you can see a real problem: dust blowing from vents, renovation debris, signs of pests or visible growth in the ducts. Our crew cleans every supply and return run under HEPA-filtered negative pressure, protects your floors and shows you the before-and-after condition.

Air duct cleaning removes the dust, debris and nest material that build up inside the supply and return ducts of a forced-air heating or cooling system. In Brooklyn and nearby cities, we see the need most often after a renovation, after a pest problem, or in homes where dust keeps drifting out of the registers no matter how often someone wipes them down. This page explains when cleaning makes sense, what our certified technicians do during a visit, how we protect your home while we work, and what changes the scope of a job. It also explains when duct cleaning may not be worth doing, because some problems that look like dirty ducts have other causes.

Signs you need it

For most homes, duct cleaning is not a routine yearly task. The U.S. EPA recommends it when there is a clear reason, and those reasons are usually things you can see, hear or smell.

Renovation dust, animal activity and visible debris are the clearest cases. Odors and weak airflow can have other causes, such as a clogged filter, a disconnected duct or a dirty coil. We check for those first so you don't pay for a cleaning that won't fix the problem.

  • Dust or debris puffing out of supply vents when the system starts
  • Grilles and the wall or ceiling around them turning gray soon after you clean them
  • Drywall, plaster or sawdust left in the ducts after a renovation
  • Scratching, scurrying or chirping sounds in the ductwork, or droppings near registers
  • Visible growth that looks like mold on duct surfaces or around the blower
  • A stale or musty odor that is strongest when the system is running
  • Weak airflow from certain rooms that isn't explained by a closed damper or a dirty filter

What's included

Every standard air duct cleaning covers the whole forced-air system, not just the vents you can see. If part of the system can't be reached safely, we tell you which part and why.

  • Walk-through to locate every supply register, return grille and the air handler
  • Pre-cleaning look inside accessible ducts, using a camera where runs are out of sight
  • Removal and washing of supply and return grilles
  • Rotary brushing or air-whip agitation of each supply and return run, sized to the duct
  • HEPA-filtered negative-pressure collection connected to the system throughout
  • Cleaning of the supply and return plenums where they can be reached
  • Cleaning of the blower compartment and a visual check of the blower wheel
  • Filter replacement if you have the right size on hand, or a note of the size you need
  • Post-cleaning look so you can compare the before-and-after condition
  • A short written note of what we found: loose or disconnected runs, gaps, damage, or signs of pests or moisture

How our crew works in your home and on the roof

Before any equipment comes in, the crew lays drop cloths from the entry to the work area and under each register. Grilles come off, and the openings we aren't working on are covered so loosened debris is pulled toward the collection unit instead of into the room.

The core of the job is negative pressure. A HEPA-filtered vacuum is connected to the main trunk line, and while it pulls air, technicians work rotary brushes and air whips through each branch, room by room. Flexible duct gets gentler tools than sheet metal, because aggressive brushing can tear the inner liner.

A camera comes out where it helps: long runs, vertical risers in rowhouses and multi-family homes, or any spot where we suspect a disconnected section or a nest. You're welcome to watch the screen with us.

Some homes have the air handler or a rooftop unit up top, or ductwork running through an attic. In those cases we need safe access, such as a roof hatch or attic stairs, and we clean and check those components where they sit. If a roof or attic isn't safe to work on, we won't force it, and we'll explain exactly what was left out.

The guidance we follow

Household air ducts don't have a yearly inspection schedule the way chimneys do under NFPA 211. Our approach follows the U.S. EPA's guidance: clean ducts when there is substantial visible mold growth, vermin, or excessive dust and debris. The EPA also notes that duct cleaning has not been shown to prevent health problems, so we don't make health claims. We talk about what we can see and measure: dust, debris, pests, odors and airflow.

The EPA also cautions consumers to research the process before responding to very cheap advertised offers and to be careful with chemical treatments. We don't apply sanitizers or coatings as a routine add-on. If one is ever discussed, we explain what the product is, where it would go and why, so you can decide. If we see suspected mold, we'll show it to you, but the moisture source has to be found and fixed or the growth will return.

What affects the price

We quote after seeing the system, because duct jobs vary widely from one home to the next. These are the main factors:

  • How many floors the home has and how many supply and return registers there are
  • Where the air handler sits and how hard it is to reach: basement, closet, attic or roof
  • The type of system, such as a forced-air furnace, central air or a heat pump
  • Duct size, material and condition, since sheet metal, flex duct and duct board each need different handling
  • How much buildup there is, especially after renovation work or pest activity
  • Whether a camera inspection is needed, or whether repairs such as resealing joints or reconnecting a loose run come up

How a visit works

When you contact us, we ask about the size of your home, the type of system, where the equipment is located and what you've noticed. That helps us bring the right tools and plan the time.

On arrival, the crew walks the home with you, points out every register and checks the filter and visible ductwork. If the problem looks like something other than dirty ducts, we say so before starting.

Next comes setup: drop cloths, covered openings and the HEPA unit connected to the trunk line. Cleaning goes room by room, then the plenums and blower compartment are cleaned.

At the end, grilles go back on, we run the system to confirm airflow, and we go over the before-and-after condition with you. You get a short written note of anything that needs attention later.

Air Duct Cleaning by city

What to expect

How a visit goes

  1. We find the cause first

    A leak, a draft problem or a smoky room can have several causes. We track down the actual source before suggesting a repair, so you are not paying for work that does not solve it.

  2. We show you what we see

    Most of a chimney is out of sight. We photograph the flue, crown, flashing and cap so you can see the condition for yourself and decide with full information.

  3. We keep your home clean

    We cover floors and furniture near the work area, contain soot and debris, and clean up before we leave.

FAQ

Common questions

How often should air ducts be cleaned?

There's no fixed schedule. The EPA recommends cleaning when there is substantial visible mold, vermin, or excessive dust and debris. Many homes go years without needing it, while a renovation or pest problem can create the need right away.

Will duct cleaning help with allergies?

We can't promise that. The EPA says duct cleaning has not been shown to prevent health problems. What we can do is remove visible dust, debris and nest material, and point out leaks or disconnected runs that may be pulling in dust.

Should I clean my ducts after a renovation?

Renovation is one of the most common reasons. Drywall and plaster dust settle in ducts, especially if the system ran during the work. It's best to schedule the cleaning after the dusty work is finished.

Do you use chemical treatments?

Not as a routine add-on. Following EPA caution on chemical treatments, we only discuss them when there's a specific reason, and we explain the product and where it would be applied so you can decide.

Can you clean my dryer vent during the same visit?

Dryer vent cleaning is a separate service, but it can often be scheduled for the same day. According to the U.S. Fire Administration, failure to clean is the leading factor contributing to home clothes dryer fires, so it's worth asking about.

How long does a visit take?

It depends on the number of registers, the layout and where the air handler sits. We'll give you a time estimate after asking about your home, and we confirm it during the walk-through.

Find out what your chimney needs

Tell us what you are noticing, and we will schedule a visit, inspect the system, and give you a written price with photos before any work begins.

(912) 885-2735 Request Service
Call (912) 885-2735 Request Service